bnoon Posted February 8, 2013 Report Share Posted February 8, 2013 I'm thinking of making a removable box for two tens. Subs would face down towards the floor in a single bandpass with the vents facing foward under the third row seats. Would need to angle the subs a bit to fit the space most likely too. Let me see your install if you have one. Quote Link to comment Share on other sites More sharing options...
Kolk1 Posted February 8, 2013 Report Share Posted February 8, 2013 EDIT: Whoops, Just realized this is the Flex section. Sorry. I have another thread on here. Ive done 2 10inch Alpine type Es on a Kicker IX amp Pair of Hertz HSK 165XL components on a RE Audio Amp Some dynamat, and a Viper 2 way Remote Start. Box is raised up a little to cover the hump on the back ledge. It also has 2 metal feet hanging down so you can bolt it to the floor. Not pictured in one in the rear as well, attaching it to the brace across the back of the trunk. (before I added the metal legs) This one is the same setup, but with an Alpine amp, I did for another member on here. Quote Link to comment Share on other sites More sharing options...
Kolk1 Posted February 8, 2013 Report Share Posted February 8, 2013 Ive done several down firing boxs for customers, Heres a recent one in a Jeep Wrangler. Quote Link to comment Share on other sites More sharing options...
bnoon Posted February 8, 2013 Author Report Share Posted February 8, 2013 Yeah down fires sound ok, but I'm going to do a bandbass box and have the vents face forward at the lower edge under the rear seats facing forward. Quote Link to comment Share on other sites More sharing options...
SpoolinX2 Posted February 11, 2013 Report Share Posted February 11, 2013 I've got an Alpine Type-R 12" in a small sealed box (will work on a custom box later), with a Kenwood 800w amp that I have fastened to the underside of the rear deck. Ran the remote for the amp up to one of the storage locations in the console. Quote Link to comment Share on other sites More sharing options...
darreli Posted February 11, 2013 Report Share Posted February 11, 2013 I have 2 12" RE Audio Pros in a ported enclosure (custom enclosure coming soon) pushed by an Arc Audio KS1200.1. Might be a little much. Quote Link to comment Share on other sites More sharing options...
bpd1151 Posted February 11, 2013 Report Share Posted February 11, 2013 Might be a little much. A mantra you seem to embrace wholeheartedly there Darrell. Sent from my DROID3 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
bnoon Posted February 12, 2013 Author Report Share Posted February 12, 2013 No Flexes with subs??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.