Crash712us Posted March 23, 2013 Report Share Posted March 23, 2013 I am no expert on but when creating calculator you name it something such as "boost" Now when setting up gauge you need to select boost from the menu, by your left and right arrow til you find the menu you set the calculator on. Hopefully this makes since and helps you. I wish I had a better understand of the MyCal to better explain or create video how to's as there are others who have asked for my help. There just a lot of steps to configure these calculators. Link to comment Share on other sites More sharing options...
larrylu Posted March 23, 2013 Report Share Posted March 23, 2013 man...I can not get the boost gauge to work on this thing. I tried it when I first got it and was unsucessful. I just tried it again and nothing. I followed these steps to a tee and nothing. odd... Boost on the MYCAL may be easy for a few but for the most of us it's tough. I know I struggled. For me each time I tried I came away with a little more knowledge or comfort. After many such attempts I finally got a functioning BOST gauge. It certainly is not intuitive. I would advise to keep plugging away and take it as a challenge. Link to comment Share on other sites More sharing options...
Imminent Rueage Posted March 23, 2013 Author Report Share Posted March 23, 2013 If you refer to my post #4, and reference your DashDaq manual as well, under the section that talks about creating custom calculators, they tell you how to make the boost gauge so between those to guides you should have no problem setting up the gauge. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.