Jump to content
Ecoboost Owner Forums

Recommended Posts

When.you say you "ordered the part", what did that order entail?

 

Just the cover itself? The whole entire piece, to include the cup holder and cover as all one unit?

 

In either scenario, both repairs are fairly easy peasy.....

 

If it is/was just the cover only, then the posts that protrude from either end, simply snap into the clips on the cup holder well itself.

 

If you ordered the entire assembly, we'll then that's just as easy....

 

You want to dislodge/partially remove the long, thin plastic straps that outline either side of the center console.

 

These strips are.... on the driver's side it has the push start button, and on the psgr side, the trunk release button.

 

Once you remove those, you will expose the fasteners (IIRC I think they are 8mm hex heads) that hold down each piece of the center console itself.

 

In your case, the cup holder with broken cover will look like this once removed:

 

DSC_0643_zpsdba2c717.jpg

 

Ignore my white cf work....

 

But that's the gist of it.

 

Need anything else, post or pm me.

 

Good luck.

 

Sent from my SM-N920V using Tapatalk

Share this post


Link to post
Share on other sites

No, not at all.

 

Open up the cover for the center console storage area, start at the rear most part of either strip, and gently pull upwards.

 

There are are several tabs, I think about every 4-6 inches or so....

 

It is surprisingly easy to do.

 

Sent from my SM-N920V using Tapatalk

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×