Blaine109 Posted April 28, 2012 Report Share Posted April 28, 2012 Does anyone know what their knock sensor counts are? I'm looking for a comparison. Thanks, Blaine Link to comment Share on other sites More sharing options...
EcoBoostSHO Posted April 28, 2012 Report Share Posted April 28, 2012 I just loaded stage 2 and it appears I am seeing up to 3 degrees of knock when it's floored on 93 octane. This is with the Sct scanner though and other things are weird in there ( I.e. the current gear is indicated as 12 or 15) so I'm not even sure it's accurate. I actually emailed Rick to see if they thought this was normal/safe. On my GTP a couple of degrees wasn't a big deal but I'm not sure about these motors. What are you seeing? Link to comment Share on other sites More sharing options...
mdog Posted April 28, 2012 Report Share Posted April 28, 2012 93 octane performance I see 11.7:1 A/F and 0 knock counts. At least so far in any of the logs I've done. Link to comment Share on other sites More sharing options...
EcoBoostSHO Posted April 28, 2012 Report Share Posted April 28, 2012 93 octane performance I see 11.7:1 A/F and 0 knock counts. At least so far in any of the logs I've done. Whar stage? Any mods? Also what are you using to acan? If livelink is it 6.5 or gen 2? Link to comment Share on other sites More sharing options...
mdog Posted April 28, 2012 Report Share Posted April 28, 2012 It's Torrie's 93 perf. tune. The tune and MRT axlebacks are it. I use the iTSX to load tunes and log through. Livelink 6.5 on my laptop to look at it all. Link to comment Share on other sites More sharing options...
EcoBoostSHO Posted April 28, 2012 Report Share Posted April 28, 2012 Can I ask what kibd of timing it is calling for? Thx... Link to comment Share on other sites More sharing options...
Blaine109 Posted April 28, 2012 Author Report Share Posted April 28, 2012 I'm looking for an actual knock count. My service manager says the baseline for the SHO is 500. I'm running knock counts in the 900's. Link to comment Share on other sites More sharing options...
EcoBoostSHO Posted April 29, 2012 Report Share Posted April 29, 2012 I'm looking for an actual knock count. My service manager says the baseline for the SHO is 500. I'm running knock counts in the 900's. Whoops...sorry man. Saw knock and got carried away. I can't even get that with my scanner to read that parameter. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.