Jump to content
Ecoboost Owner Forums

Want to Data Log / Monitor Boost in your SHO with your iTSX?

Recommended Posts

I sent this file to a couple other members, but figured I would post it for everyone. If you have an SCT iTSX and want to data log / monitor boost, you will need this file. Here is what you need.


You need to make sure your iTSX is running the newest firmware ( Then you need an SCT DLX file (attached) that contains the PID parameter for boost. Download it here, unzip it and email it to yourself. Once you have have it in email, you click / touch on the .DLX file in your email (on your iPhone etc) and it will import into the iTSX program. Once imported, the custom DLX shows up in the Datalog Config area. Choose it, setup which gauge you want it on, and your good to go.





Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...