mac99br Posted September 24, 2014 Report Share Posted September 24, 2014 When i put in a cooling thermostat in my sho do i have to seal it or buy a gasket for it or do i just bolt them back on? And i have a 4+x tune on with 3bar after i put the thermostat in will my fan stop going on all the time. EkbergJen 1 Quote Link to comment Share on other sites More sharing options...
Livernois Motorsports Posted September 24, 2014 Report Share Posted September 24, 2014 Just re-install the new thermostat right where the old one was, seal it back up and then burp the coolant system. Quote Link to comment Share on other sites More sharing options...
mjhpadi Posted September 24, 2014 Report Share Posted September 24, 2014 There is a rubber gasket that goes in, just be careful to note how it comes out, so that you reinstall it correctly, because it has a beveled edge, but there is no gasket as such to mate the thermostat housing to the engine. The tune should have new settings so the fan runs correctly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.